PWD EXAM CIVIL EXAM EXPECTED QUESTION

Prashik December 12, 2023 0

सार्वजनिक बांधकाम विभाग भरती 2023

1➤ A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be

2/3३/25/88/5

2➤ Principal planes are subjected to

Normal stresses onlyTangential stresses onlyNormal stresses as well as tangential stressesNone of these

3➤ A masonry dam (density = 20,000 N/m3) 6 m high, one metre wide at the top and 4 m wide at the base, has vertical water face. The minimum stress at the base of the dam when the reservoir is full, will be

75 N/m2750 N/m2 7,500 N/m275,000 N/m2

4➤ The ratio of the maximum deflections of a simply supported beam with a central load W and of a cantilever of same length and with a load W at its free end, is

1/81/101/121/16

5➤ The ratio of the length and depth of a simply supported rectangular beam which experiences maximum bending stress equal to tensile stress, due to same load at its mid span, is

1/22/31/41/3

6➤ A three hinged arch is generally hinged at its supports and

At one quarter span At the crownAnywhere in the ribNone of these

7➤ Shear strain energy theory for the failure of a material at elastic limit, is due to

RankineGuest or Trecas St. VenantVon Mises

8➤ A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm2. If the slope at the ends is 0.005 radian and the value of E = 0.2 × 106 N/mm2, the depth of the joist, is

200 mm250 mm300 mm400 mm

9➤ A compound truss may be formed by connecting two simple rigid frames, by

Two barsThree barsThree parallel barsThree bars intersecting at a point

10➤ In the truss, the force in the member AC is

6.25 t compressive8.75 t tensilet tensile t compressive

Your score is

Pariksha Sarav [ परीक्षा सराव ]

Ads Area

PWD EXAM CIVIL EXAM EXPECTED QUESTION

1➤ A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be

2➤ Principal planes are subjected to

3➤ A masonry dam (density = 20,000 N/m3) 6 m high, one metre wide at the top and 4 m wide at the base, has vertical water face. The minimum stress at the base of the dam when the reservoir is full, will be

4➤ The ratio of the maximum deflections of a simply supported beam with a central load W and of a cantilever of same length and with a load W at its free end, is

5➤ The ratio of the length and depth of a simply supported rectangular beam which experiences maximum bending stress equal to tensile stress, due to same load at its mid span, is

6➤ A three hinged arch is generally hinged at its supports and

7➤ Shear strain energy theory for the failure of a material at elastic limit, is due to

8➤ A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm2. If the slope at the ends is 0.005 radian and the value of E = 0.2 × 106 N/mm2, the depth of the joist, is

9➤ A compound truss may be formed by connecting two simple rigid frames, by

10➤ In the truss, the force in the member AC is

Post a Comment

Top Post Ad

Below Post Ad

Ads Area

Ads Area

Labels

Categories

Contact form

Pariksha Sarav [ परीक्षा सराव ]

Ads Area

PWD EXAM CIVIL EXAM EXPECTED QUESTION

भूमिअभिलेख विभाग परीक्षेच्या संपूर्ण तयारीसाठी आजच खरेदी करा. खरेदी करण्यासाठी IMAGE वर क्लिक करा.

1➤ A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be

2➤ Principal planes are subjected to

3➤ A masonry dam (density = 20,000 N/m3) 6 m high, one metre wide at the top and 4 m wide at the base, has vertical water face. The minimum stress at the base of the dam when the reservoir is full, will be

4➤ The ratio of the maximum deflections of a simply supported beam with a central load W and of a cantilever of same length and with a load W at its free end, is

5➤ The ratio of the length and depth of a simply supported rectangular beam which experiences maximum bending stress equal to tensile stress, due to same load at its mid span, is

6➤ A three hinged arch is generally hinged at its supports and

7➤ Shear strain energy theory for the failure of a material at elastic limit, is due to

8➤ A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm2. If the slope at the ends is 0.005 radian and the value of E = 0.2 × 106 N/mm2, the depth of the joist, is

9➤ A compound truss may be formed by connecting two simple rigid frames, by

10➤ In the truss, the force in the member AC is

You may like these posts

Post a Comment

Top Post Ad

Below Post Ad

Ads Area

Contact form